Filter
Top Products
6-11
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
OL-3930-02
Chapter 6 Configuring the Wireless Network Settings on the Cisco Wireless IP Phone 7920
Entering or Verifying 802.11b Configuration Settings
Related Topics
• Viewing the Associated AP SSID, page 6-11
• Viewing the Network Type, page 6-11
Viewing the Associated AP SSID
To identify the SSID that the AP and Cisco Wireless IP Phone 7920 are currently
associated with, use the following steps.
Procedure
Step 1 Press the Menu softkey.
Step 2 Choose Network Config > 802.11b Configuration.
Step 3 Scroll to Associated AP SSID.
Step 4 Press Select to view the AP SSID that the phone is using to associate with the AP.
Step 5 Press Back to return to the 802.11b Configuration menu options.
Related Topics
• Viewing the Associated Access Point MAC Address, page 6-10
• Viewing the Network Type, page 6-11
Viewing the Network Type
The network type setting is always set for infrastructure. The Cisco Wireless
IP Phone 7920 does not support adhoc network type.
Procedure
Step 1 Press the Menu softkey.
Step 2 Choose Network Config > 802.11b Configuration.
Step 3 Scroll to Network Type.