Filter
Top Products
Chapter 5 Configuring Network Settings on the Cisco Wireless IP Phone 7920
Verifying or Entering Network Settings
5-4
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
OL-3930-02
Figure 5-2 Symbol Table
Related Topics
• Displaying the Network Configuration Menu, page 5-2
• Verifying or Entering Network Settings, page 5-4
Verifying or Entering Network Settings
On Cisco Wireless IP Phone 7920, you can view detailed information about the
current network settings of the phone. You can use this information to
troubleshoot problems or to change settings. The Network Configuration menu
provides access to the network settings that are described in Table 5-1.
Table 5-1 Network Settings
Network Setting Description Usage Notes
DHCP Enable Displays Yes or No to indicate whether
Dynamic Host Configuration Protocol
(DHCP) is being used to obtain an IP
address for the phone.
See the “Modifying DHCP
Settings” section on page 5-7
DHCP Server Displays IP address of the Dynamic Host
Configuration Protocol (DHCP) server
that the phone uses to obtain IP address.
See the “Modifying DHCP
Settings” section on page 5-7.
IP Address Indicates the Internet Protocol (IP)
address of the phone.
See the “Assigning an IP
Address” section on page 5-9.
Subnet Mask Indicates the subnet mask used by the
phone.
See the “Assigning a Subnet
Mask” section on page 5-10.