Filter
Top Products
Chapter 6 Configuring the Wireless Network Settings on the Cisco Wireless IP Phone 7920
Entering or Verifying Wireless Settings
6-6
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
OL-3930-02
Step 6 If you chose “Specify, ” press Edit and enter an SSID value.
Note An “SSID Required!”message appears if you leave the SSID field blank
when you selected “Specify.”
Step 7 Scroll to SSID 2, and press Select.
Step 8 Choose Any, None, or Specify. If you choose “Specify”, you must enter another
SSID value.
For information about entering values, see the “Guidelines for Editing Settings in
the Network Configuration Menu” section on page 5-3.
Step 9 Choose the entry for SSID 3 and SSID4 as done in Step 8.
Step 10 When you have completed the entries, press Save.
Step 11 Press Back to return to the Wireless options.
Related Topics
• Selecting the Authentication Type
• Setting Up the Wired Equivalent Privacy Keys
• Activating the Wireless Settings
Selecting the Authentication Type
The Cisco Wireless IP Phone 7920 supports three types of authentication:
• Open—Provides access to all APs and authentication through the optional
use of WEP keys at the local access point
• Shared Key—Provides shared-key authentication through the use of WEP
keys at the local access point
• LEAP—A proprietary protocol for use in 802.11 wireless LAN environments
that exchanges a password and username with a RADIUS server in the
network