Filter
Top Products
4-23
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
OL-3930-02
Chapter 4 Using the Cisco 7920 Configuration Utility
How to Use the Cisco 7920 Configuration Utility
Step 3 To set the Data Rate, click the arrow by the drop-down list and choose the
appropriate data rate setting. (Default setting is 11mW)
Step 4 To enter the SSID1 setting, click the arrow by the drop-down list and choose one
of these:
• Any—To use any AP in the network.
• Specify—To specify an SSID. Enter an SSID of up to 32 digits in length in
the field.
Step 5 To enter the SSID2-4 settings, click the arrow by the drop-down lists and choose
one of these:
• Any—To use any AP in the network
• None—No SSID is specified
• Specify—To specify an SSID. Enter an SSID of up to 32 digits in length in
the field
Step 6 Choose File > Save to save the changes.
Setting Network Security
The Network Security tab in the Phone Preference window allows you to select
the authentication type and encryption for the security settings.
Authentication Type
You can configure the following types of authentication:
• Open—Allows open access to APs. You can set the optional encryption type
to static Wired Equivalent Privacy (WEP) Key .
• Shared Key—Enables the Shared Key security option on the local APs. You
must set the encryption type as static WEP Key prior to setting the Shared
Key authentication type.
• LEAP—Enables Cisco Light Extensible Authentication Protocol (LEAP), a
proprietary Cisco protocol, designed for authenticating wireless devices by
using a central RADIUS server in WLAN environment.