Filter
Top Products
Polycom VVX 500 and VVX 600 Business Media Phones and Polycom VVX Camera User’s Guide
Polycom, Inc. 75
LED State
Phone State
Flashes amber and green
Camera firmware is updating
Flashes green
Incoming video call
Green
Video call is connected
Amber
One of the following:
Incoming call (no video or audio-only)
Outgoing call
Audio call is connected
Video is muted
Held call
Camera shutter is open, but video is not enabled
and camera is not selected
Table 8: VVX Camera Messages
Message
What to Do
VVX Camera attached. Firmware sync in progress, do
not remove camera.
Your camera is upgrading. Do not remove your camera
during this process. The upgrade is complete when you
receive either a firmware sync complete or upgrade
failed message. For more information on the firmware
sync complete or upgrade failed message, locate the
message in this table.
VVX Camera firmware sync complete. Camera ready.
Indicates that your camera is ready to use.
VVX Camera firmware sync complete. Contact
administrator to enable video.
Indicates that your camera is ready to use. However,
your phone is not enabled to send and receive video.
See your system administrator.
VVX Camera firmware sync complete. Camera
rebooting.
Indicates that the camera firmware sync is finished, and
your camera is in the process of rebooting.
VVX Camera firmware sync complete. Video available
when next idle.
Indicates that your camera is ready to use for your next
video call.
VVX Camera attached, camera ready.
Indicates that your camera is ready to use.
VVX Camera attached. Contact administrator to enable
video.
Indicates that your camera is ready to use. However,
your phone isn’t enabled to send and receive video.
See your system administrator.
VVX Camera attached. Video available when next idle.
Indicates that your camera is ready to use for your next
video call.