Filter
Top Products
5-4 Issue 2.0 December 1995
4. Select Members.
■ On the console: Select Members.
■ On the PC: Press .
5. Enter the extension number of the calling group. (Generally, use 770,
unless it has been renumbered.)
6. Save your entry.
■ On the console: Select Enter.
■ On the PC: Press .
7. Enter the extension number of the port you want to assign.
8. Save your entry.
■ On the console: Select Enter.
■ On the PC: Press .
9. Repeat Steps 7 and 8 for each extension.
10. Return to the System Programming menu.
■ On the console: Select Exit three times.
■ On the PC: Press three times.
Group Calling Trunk or Pool
Assignments
Use this procedure to assign or remove trunks or pools that ring directly into a
calling group.
Incoming calls on each trunk or pool can be directed to only one calling group.
To reassign a trunk or pool to a new calling group, you must remove it from its old
group before making the new assignment.
To assign trunks or pools to ring directly into a calling group:
1. From the System Programming menu, select Extensions.
■ On the console: Select Extensions.
■ On the PC: Press .
The Extensions menu appears.
2. Access the second screen of the Extensions menu.
■ On the console: Press More.
■ On the PC: Press .
F9
F10
F10
F5
F6
PgUp