Filter
Top Products
5-16 Issue 2.0 December 1995
■ If the next service group operator is not sequential:
— On the console: Select Enter and then select Exit. Repeat
Steps 2-6.
— On the PC: Press and then press . Repeat Steps 2-6.
To save your entry when all entries are complete:
■ On the console: Select Enter.
■ On the PC: Press .
8. Return to the System Programming menu.
■ On the console: Select Exit two times.
■ On the PC: Press two times.
Assign AUDIX Calling Group for
Night Service
Use this procedure to assign calling groups to a Night Service group for after-
hours coverage.
A maximum of eight Night Service groups can be assigned (no more than one for
each operator position assigned). Any number of telephones can be assigned to
a Night Service group, and a telephone can belong to more than one group.
To assign calling groups to a Night Service group for after-hours coverage:
1. From the System Programming menu, select Night Service.
■ On the console: Select NightSrvce.
■ On the PC: Press .
The Night Service menu appears.
2. Select Group Assignment.
■ On the console: Select GroupAssign.
■ On the PC: Press .
The Night Serv Group Assign screen appears.
3. To add a calling group to a Night Service group:
■ On the console: Select Calling Grp.
■ On the PC: Press .
4. Enter the attendant extension for which you are assigning Night Service.
F10 F5
F10
F5
F10
F1
F1