Filter
Top Products
5-2 Issue 2.0 December 1995
4. Specify the disconnect signal as reliable.
■ On the console: Select Yes.
■ On the PC: Press .
5. Save your entry.
■ On the console: Select Enter.
■ On the PC: Press .
6. Return to the System Programming menu.
■ On the console: Select Exit two times.
■ On the PC: Press two times.
Group Coverage Member Assignments
Use this procedure to assign a telephone to a coverage group. Coverage is an
arrangement in which calls from a group of senders are redirected to one or
more receivers. A coverage group is a group of senders.
NOTE:
This procedure assigns senders.
A maximum of 30 coverage groups is allowed, each with an unlimited number of
members. Up to eight receivers can be assigned per coverage group.
A telephone can be a sender in only one group; it can be a receiver for more than
one coverage group.
To assign telephones to a coverage group:
1. From the System Programming menu, select Extensions.
■ On the console: Select Extensions.
■ On the PC: Press .
The Extensions menu appears.
2. Access the second screen of the Extensions menu.
■ On the console: Press More.
■ On the PC: Press .
3. Select Group Cover.
■ On the console: Select Group Cover.
■ On the PC: Press .
The Group Coverage screen appears.
F1
F10
F5
F6
PgUp
F3