Filter
Top Products
4-8 Issue 2.0 December 1995
■ M7-U87 Crossover Cable
■ Two (2) Z3A2 ADUs
■ Two M8AJ-87 Cables
■ D8AM-87 Modular Crossover Cable
■ Two (2) 400B2 Adapters
■ Two (2) D6AP-87 Modular Cords
■ Two (2) 248B Adapters
■ Two (2) 2012D Power Transformers
NOTE:
The combination of a Z3A2 ADU and a M8AJ-87 cable is equivalent to a
Z3A4 ADU. You must order both pieces (one of each).
NOTE:
Inside wire must be 4-pair, suitable for data; type 3 UTP data cable or
better.
Refer to Figure 4-4. Connect the MERLIN LEGEND Communications System
Admin port and the Intuity system Serial Port 1 (COM1) by following these steps:
1. Connect one end of a D8W-87 modular cord to the Admin (lower) modular
jack on the MERLIN LEGEND Communications System.
2. Connect the other end of the D8W-87 modular cord to a 355AF adapter.
3. Connect the 355AF adapter to one end of an M7-U87 crossover cable.
4. Connect the other end of the M7-U87 crossover cable to the matching end
of a M8AJ-87 cable.
5. Connect the other end of the M8AJ-87 cable to the matching connector on
a Z3A2 ADU.
6. Connect one end of a D8W-87 modular cord to the modular jack marked
WALL on the Z3A2 ADU.
7. Connect the other end of the D8W-87 modular cord to the modular jack
end of a D8AM-87 crossover cord.
8. Connect the modular plug end of the D8AM-87 crossover cord to the
matching modular jack on a 400B2 adapter.
9. Plug the 400B2 adapter into the wall jack leading to the Intuity system site.
10. Connect one end of a D6AP-87 modular cord to the 400B2 adapter.
11. Mount a 248B adapter to a 2012D power transformer.
12. Connect the other end of the D6AP-87 modular cord to the 248B adapter.
13. Plug the 2012D power transformer into an AC power outlet.