Filter
Top Products
Issue 2.0 December 1995 4-17
Figure 4-9. Connecting SMDR Ports More Than
50 Feet/Different Power Outlet
14. Connect to the Intuity System:
— To connect to Serial Port 2 on the MAP/5 or COM2 on the MAP/40 or
MAP/100, connect the 9-pin end of the 9-pin-to-25-pin adapter to
Serial Port 2 on the Intuity system. Then connect one end of an
M8AJ-87 cable to the 25-pin end of the 9-pin-to-25-pin adapter.
— To connect to the first available port on the Multi-Port Serial Card,
connect one end of the 6-position, 6-conductor modular cord to the
port. Connect the other end of the modular cord to the DTE 4/6-to-
DB-25P Adapter. Then connect one end of an M8AJ-87 cable to the
other end of the DTE 4/6-to-DB-25P adapter
15. Connect the other end of the M8AJ-87 cable to the Z3A2 ADU.
16. Connect one end of a D8W-87 modular cord to the modular jack marked
WALL on a Z3A2 ADU.
17. Connect the other end of the D8W-87 modular cord to a 400B2 adapter.
18. Plug the 400B2 adapter into the wall jack from the Communications
System site.