Filter
Top Products
4-10 Issue 2.0 December 1995
Go to the Intuity system site to continue the connection. Refer to Figure 4-5.
Figure 4-5. Connecting Admin Ports More Than
50 Feet/Different Power Outlet
14. Connect to the Intuity system:
— For the MAP/5, connect one end of a M8AJ-87 cable directly to
Serial Port 1 (tty00) of the MAP/5.
— For the MAP/40 and MAP/100, connect one end of a M8AJ-87
cable to the 25-pin end of the DB-9S to DB-25P adapter, and then
connect the 9-pin end of that adapter to port COM1 (tty00) of the
MAP/40 or MAP/100.
15. Connect the other end of the M8AJ-87 cable to the Z3A2 ADU.
16. Connect one end of a D8W-87 modular cord to the modular jack marked
WALL on the Z3A2 ADU.
17. Connect the other end of the D8W-87 modular cord to a 400B2 adapter.
18. Plug the 400B2 adapter into the wall jack from the Communications
System site.
19. Connect one end of a D6AP-87 cord to the 400B2 adapter.