Filter
Top Products
2-2 Issue 2.0 December 1995
■ Voice Ports (Form 2a)
■ Intuity AUDIX Subscribers (Form 2a)
■ Loop-Start Reliable Disconnect (Form 2c)
■ Intuity System Trunks (Form 2c)
■ Group Coverage (Form 7c for Release 3.0; Form 6d for Release 2.0)
■ Group Calling (Form 7d for Release 3.0; Form 6e for Release 2.0)
■ Restrictions and Allowed and Disallowed LIsts (Forms 6e, 6f, and 6g for
Release 3.0; Forms 6g, 6h, 6i for Release 2.0)
■ Night Service (Form 9a for Release 3.0; Form 7a for Release 2.0)
Application Names
All applications in use with a MERLIN LEGEND system are listed on Form 1,
pages 3 and 4 for documentation purposes. (They are not input to the switch.) To
maintain Form 1, on page 4:
1. Check the “Other” box.
2. Check a box below the “Other” box, and write Intuity on the line provided.
3. In the “Notes” section, include any pertinent information. (For example,
Intuity AUDIX or Intuity IVR.)
Number Plan
The Intuity system requires that the switch have a fixed-length number plan (at
least for extensions that have mailboxes or can be transferred to or from the
Intuity system). The MERLIN LEGEND system can have a fixed three-digit or four-
digit number plan. The Intuity system will not work with a MERLIN LEGEND
variable length number plan or with a two-digit number plan. To renumber the
MERLIN LEGEND extensions, follow these steps:
1. Depending on the numbering plan you are using, check “3-Digit” or “Set
Up Space” under the “Renumber System” heading on Form 2a.
2. Write the new extension numbers in the “Renumber To” column on Form
2a, Form 2b, Form 2c, and Form 2d as needed.
Voice Ports
Voice ports used for communication between the MERLIN LEGEND system and
the Intuity system must be assigned on a BTM-012 module (Basic Telephone
Module-12).
NOTE:
The OPX module cannot be used for voice ports connected to the Intuity
System.