Filter
Top Products
4-18 Issue 2.0 December 1995
19. Connect one end of a D6AP-87 cord to the 400B2 adapter.
20. Mount a 248B adapter on a 2012D power transformer.
21. Connect the other end of the D6AP-87 cord to the 248B adapter.
22. Plug the 2012D power transformer into an AC outlet.
Networking
Networking is an
optional
application on Intuity systems connected to the
MERLIN LEGEND system. MERLIN LEGEND system supports Intuity low-speed
digital networking and AMIS analog networking. High-speed digital networking is
not supported since the MERLIN LEGEND system does not support the DCP
protocol.
There are two methods for configuring low-speed digital networking with the
MERLIN LEGEND system:
■ If the MERLIN LEGEND system has DID lines, Intuity low-speed digital
networking is connected through the MERLIN LEGEND switch.
■ If the MERLIN LEGEND system does not have DID lines, the connections
use Loop Start (LS) lines from the Central Office (CO) and bypass the
switch.
AMIS Analog Networking requires no special hardware for connectivity since it
uses the voice channels already assigned to voice services. (Traffic
configuration rules may necessitate the addition of voice channels to absorb the
load of AMIS networking.)
In order to support AMIS Analog Networking, the MERLIN LEGEND system must
be configured to send incoming calls on external lines directly to AUDIX. (Touch-
tone codes on the incoming calls identify the calls as AMIS networking and
cause proper call handling.) Many MERLIN LEGEND customers already do this
in order to support an automated attendant.
Connecting Low-Speeed Digital Networking
The following parts are required:
■ ACCX Board (includes cable and breakout box)
■ Modem (Paradyne
®
COMSPHERE
®
3820, includes modular cord and
power supply)
■ DB-25 M-M cable