Filter
Top Products
4-12 Issue 2.0 December 1995
3. Connect the 355AF adapter to the matching connector of a 9-pin-to-25-pin
adapter.
4. Connect the other end of the 9-pin-to-25-pin adapter to the Serial Port 2
(MAP/5) or COM2 (MAP/40 and MAP/100) of the Intuity system.
Figure 4-6. Connecting SMDR Ports Within 50 Feet and
Same Power Outlet (Serial Port 2 or COM2)
Connecting to First Available Serial Port on
Multi-Port Serial Card
To connect to the first available port on the Multi-Port Serial Card, refer to Figure
4-7. Connect the MERLIN LEGEND Communications System SMDR port and the
Intuity system port by following these steps:
1. Connect the short end of the Z200A EMI Filter modular cord to the SMDR
(upper) jack of the MERLIN LEGEND Communications System.
2. Connect the long end of the Z200A EMI Filter modular cord to a 355A
adapter.
3. Connect the 355A adapter to the 25-pin side of the DTE 4/6-to-DB 25P
adapter.
4. Connect one end of the 6-position, 6-conductor modular cord to the DTE
4/6-to-DB 25P adapter.
5. Connect the other end of the modular cord to the first available port on the
Multi-Port Serial Card.
Intuity
System
MERLIN LEGEND
Communications System
Processor
SMDR
Port
MAP/5
Serial
Port 2
MAP/40 &
MAP/100
COM2
DB-9S to
DB-25P
Adapter
Cable
355AF
Adapter
Z200A EMI Filter
Max 50 Feet
Short
End
Long End