Filter
Top Products
C--4 Issue 2.0 December 1995
Voice Mail Administration
Voice mail is enabled when the switch sends a guest’s call to a coverage path.
The following procedure, however, provides a separate number that can be used
at any time to send voice mail to a guest.
To provide this service:
1. Administer on your switch a phantom number. This number is used to
send voice messages to your subscribers.
2. Configure the phantom number so that the Intuity system hunt group
covers all calls.
3. Assign to the new extension, the service: “ldg_ni_ca” as follows:
a. Log on to the Intuity system as sa or craft.
b. From the Intuity Administration menu select the following
sequence:.
c. From the Voice Equipment screen, press (F8) then
(F3).
d. Select Services to Called Numbers from the Assign menu.
e. Press (F2) and select ldg_ni_ca
f. Enter the called number of your choice.
g. Press (F3). A command-output screen appears confirming
your choice.
h. Press (F6) three times to exit to the Voice Equipment
screen.
4. If the phantom extension will be accessed from outside your system,
assign the extension to a Direct-Inward-Dialing number.
5. Provide the Lodging voice mail number to subscribers for the Lodging
application.
Voice Equipment
>Voice System Administration
CHG-KEYS
ASSIGN
CHOICES
SAVE
CANCEL