Filter
Top Products
Chapter 15: Extension Configuration
200 AltiWare ACM 5.1 Administration Manual
Configure the following hardware extension-specific features:
Triton Analog Station Line Properties
If you select a Triton Analog Station Board extension and click the Line Properties
button, you’ll see the Triton Analog Station Line Properties dialog box.
You can also access this window by double-clicking a span in Channel Mapping List of
the Triton Analog Station Board configuration window.
Parameter Description
Message Waiting
Signal Type
Type of Message Waiting indicator for the phone set:
• None
• Voltage—voltage-based indicator (not common
after 1996)
• FSK—Frequency Shift Keying indicator (most
common)
• Tone—tone-based indicator (not common in US
and Canada).
Caller ID Signal
Format
Message format with which to send Caller ID
information:
• None
• SDMF—Single Data Message Format for
supporting and sending a single data type, such
as phone numbers.
• MDMF—Multiple Data Message Format for
supporting and sending multiple data types, such
as name and number information.
Receive from phone
(dB Gain)
Range is 0 to +7 dB.
You can increase the extension phone's talk volume
up to 7dB with this setting. The volume will be higher
for the person on the other end of the line. Default is
0.
Setting this parameter too high may cause voice
distortion.
Transmit to phone
(dB Gain)
Range is 0 to -7 dB.
You can decrease the extension phone's receiving
volume up to 7dB with this setting. When it is
decreased, the volume is lower for the extension
user. Default is 0.