AltiGen comm ACM 5.1 Telephone User Manual


 
Chapter 12: Trunk Configuration
156 AltiWare ACM 5.1 Administration Manual
The SIP Trunk Configuration dialog box opens:
Figure 5. SIP Trunk Configuration dialog box and Edit box
To edit a line, click the Edit button, fill in the blanks, and click OK.
SIP Server IP Address—The SIP Trunk service provider’s server IP address
User Name—Assigned by the SIP Trunk service provider
Password—Assigned by the SIP Trunk service provider
Domain—The Domain Name of the SIP Trunk service provider, if required
SIP Register Period—How frequently the AltiGen system needs to send SIP
registration packets to the service provider. This can detect if the service provider is
up or not.
Automatic NAT Traversal—Leave this box unchecked.
Enable Channel—After all above parameters are entered correctly, check this box
to activate the channel. The AltiGen system will send authentication to the service
provider to verify the setting.
To copy the information in one row to other rows, select the row and click Copy To. Then
select the rows you want to copy the information to, using CTRL+click and Shift+click
to select several rows. Click OK.
To delete a row, selecte it and click Delete.