Filter
Top Products
Chapter 12: Trunk Configuration
AltiWare ACM 5.1 Administration Manual 153
transmit any data to the CO, the system will use DTMF as a way to transmit
[Caller’s Extension Number] and [Target’s Extension Number] to the other
side of the tie trunk. Because the format is AltiGen proprietary, you may have
a problem if you enable this configuration when connecting to a non-AltiGen
PBX.
• Holiday Profile—A holiday profile can be assigned to a trunk. The drop-down list
selection is based on settings configured in the Holiday tab of System Configuration
(see “Routing Calls on Holidays” on page 62).
• Business Hour Profile—A business hour profile can be assigned to a trunk. The
drop-down list selection is based on settings configured in the Business Hours tab
of System Configuration.
• Recording Option—Recording for incoming and outgoing calls is supported for
Triton Analog, T1/E1, and IP trunks; use the drop-down list to select Disable or
Enable.
• Trunk Properties—Opens a dialog box that allows you to configure low-level,
hardware-specific properties for each trunk. The options vary depending on the type
of board and trunk; this is discussed in subsequent sections.