![](http://pdfasset.owneriq.net/4/de/4de33274-149b-426d-8606-f9977158f98e/4de33274-149b-426d-8606-f9977158f98e-bg17d.png)
Technical Product Manual - DCT1900
Maintenance, Part Replacement
Maint-DCT1900/R8/mw 5-5
© 2000-2005
5.9 Board Reset
To reset a board execute one of the following procedures.
Procedure A
1. Execute a Reset-board by the System Manager-Control menu.
Procedure B
1. Execute a Replace board by the System Manager–Control menu.
2. Disconnect board from back plane connector.
3. Insert board again. The board will now automatically be tested and taken into service.