Nortel Networks DCT1900 Telephone User Manual


 
Technical Product Manual - DCT1900
Installation Instructions, or BDVNB 101 01/3
4-8
Install-DCT1900/R8/mw
© 2000-2005
Fig. 4–5 Placement of the Shielding Gaskets
Fig. 4-6 Spacing the Mounting Brackets of the Modular Cabinets
4.7 Installation of the Synchronization Distribution Board (Mobility System
Only)
Note: Not required in cabinets using CPU2 boards
The SDB must be installed in the Modular Cabinet that will contain the CPU. The best way to
install the SDB is to have the cabinet on a desk on its back and with the drawer removed. For
mounting the SDB the following material is required:
2 Shielding Gaskets
Outer surface
of cabinet
A
A
A * A
Distance adjustment plate Mounting Bracket