Filter
Top Products
CG 2400 User Guide
36
NOTE:
You can change
the description or add a
second line description
at any time. (See
“Adding and Deleting
External Phone Lines”
on page 90.)
To enter a line name:
1. Check the Use Phone Jack 1 box if you are using
just one external line. If you are using two
external lines, check also the Use Phone Jack 2
box.
2. In the Line Name field, type the appropriate line
description for each analog line connected to the
base station. The default line names are “Line 1”
and “Line 2.”
3. Click Next.
Subscribing Handsets
The Handset Subscription screen will appear:
The handset that came in your new CyberGenie box
is already subscribed to the base station. The system
supports up to ten handsets. If you want to subscribe
additional handsets, follow the steps below.
If you don’t want to subscribe additional handsets at
this time, click Next and skip to “Defining Users” on
page 38.