Filter
Top Products
CG 2400 User Guide
130
The following dial modifiers are also available to
access special telephony features:
To add a new contact—phone numbers:
NOTE
: You may need
to insert a pause for
some phone numbers.
For example, some
phone systems require
you to dial an extension
after a short greeting.
A comma signals the
system to pause for 3
seconds. The pause
character is only
available when the
system is online.
1. Click the Work tab to open the next window,
then enter the contact’s work information. All
fields on this window are optional.
2. Click the Home tab to open the next window,
then enter the contact’s home information. All
fields on this window are optional.
3. Click the Mobile tab to open the final window,
then enter the contact’s mobile phone and pager
information. All fields on this window are
optional.
4. If desired, return to the General tab and select
the Default Phone Number to Dial Out.
5. When done, click OK to save the record.
To edit a contact:
1. Access the CyberGenie Contacts window.
2. Click to highlight the contact record to be edited.
3. Click on the menu bar or right-click on the
contact name, then click Open.
4. Type over existing data. Refer to the procedures
on adding a contact above as needed.
5. When done, click OK.
To remove a contact:
1. Access the CyberGenie Contacts window.
2. Click to highlight the contact record to be
removed.
3. Click or right-click the contact record, then
click Remove.
4. Click Yes to confirm deletion.
Code for star
#
Code for pound