Filter
Top Products
CG 2400 User Guide
104
104
Unsubscribing a Handset
If you no longer want to use a specific handset with
your base station, you should unsubscribe it.
Unsubscribing requires procedures for both the
computer and the handset:
• Unassign the handset user (done from the PC)
NOTE
: Before un-
subscribing a handset
from the application,
unassign the user
assigned to the
handset.
• Unsubscribe the handset from the base station
(done from the PC)
• Unsubscribe the base station from the handset
(done from the handset)
To unsubscribe a handset:
From the PC:
1. From the PC, unassign the handset user if one is
currently assigned. (See “To unassign a handset:”
on page 103.)
2. Access the Configuration window if not already
there, then click Handsets
in the resources
panel.
3. Right-click the handset to be unsubscribed, then
click Unsubscribe Handset.
4. Click OK to confirm.
From the handset:
1. Ensure the handset is switched on. Press and
hold to turn it on.
2. When the idle display appears, press to
scroll through the menu.
3. Select >Settings >BaseStation >Delete.
The handset will display a list of base stations. In
most cases, there will be only one base station.
However, there may be situations where the
handset is subscribed to multiple base stations. If
needed, scroll to the desired base station, then
press .
4. Confirm deletion when prompted.