Filter
Top Products
CG 2400 User Guide
92
92
4. If the General Properties tab is not on top, click
the General tab, then select the desired settings:
• To change the line description, type over the
existing line name.
NOTE:
If you want to
share a line between
CyberGenie and your
PC’s fax/modem, you
must use Line 1.
• To disable outgoing calls, click the Disable
outgoing calls on this line checkbox. This lets
you disable outgoing calls for a single line without
disabling incoming calls, which allows a dedicated
incoming call line.
• To configure your system to support a fax/
modem on Line 1:
First, connect one end of a phone cable (not
included) to the fax/modem socket on the bottom
of your base station, and the other end to the
Line or Telco socket of the fax/modem card on
your computer.