Filter
Top Products
CG 2400 User Guide
18
To assemble the handset charger:
1. Insert the power
supply plug into the
socket on the back
center of the charger.
2. Align the bottom tabs
on the charger
support with the
bottom holes on the
back of the charger.
Rotate the mount
toward the charger
until it clicks in place.
3. Plug the power supply
into an approved
electrical outlet.
To charge the handset:
NOTE
: Let the handset
charge for at least
three hours before
first use.
1. Insert the handset securely into the charger.
2. If the handset is on, press the key for
approximately two seconds, or until the handset
turns off.
3. While charging, the green indicator light on the
charger will be on. If it does not come on within
10 to 20 seconds of putting the handset into the
charger, verify that the metal contacts on the
bottom of the handset align with the metal pins in
the charger.
When the handset is fully charged, the indicator light
will go off.