Filter
Top Products
CG 2400 User Guide
6
User
Anyone who is set up in CyberGenie@Work to receive
voicemail or use a handset.
External call
A call that comes in or goes out via your local phone
company.
Internal call
A call made from one handset to another.
Caller
Someone calling in to the CG 2400 system from an
external phone line.
CyberGenie session
The interaction between a user and CyberGenie
through a handset or remote phone.
Call session
Any call activity is referred to as a call session. It can
be a CyberGenie session, an external or internal call.
Air channels
A single call session uses one or two air channels,
depending on the nature of the call. For example, an
external call (incoming or outgoing) uses a single
channel. A call from a handset to CyberGenie also
uses a single air channel. Calls between two
handsets, however, use two air channels, one for
each handset.
Subscribe
To register a handset to work with the CyberGenie
base station. The base station will interact only with
a handset that has been subscribed.
Assign
To provide a user with access to a specific handset.
MAPI
Messaging Application Programming Interface, MAPI
is a Microsoft standard for messaging software that
allows different types of message information (email,
voicemail, contact lists, etc.) to be passed through a
common interface.
Unified messaging
A way of accessing your messages (voice or email)
from a single source. It includes such features as
text-to-speech, which converts email text into a
format that you can listen to when checking
messages by phone.
Full function mode
When your PC is on with CyberGenie@Work running,
the system is in full function mode.
Standalone mode
If the PC must be turned off, the system can still run
in standalone mode, which lets you place and receive
external calls, but without the additional features
provided by CyberGenie@Work.