Filter
Top Products
Appendices
207
Tables
DA 202 Base Station
Indicator Light Status
The base station indicator light is located on the base
station.
Indicator
State
Green
Base station is successfully connected to the PC and
CyberGenie@Work is running.
Green blinking
Firmware is being downloaded from the PC to the
base station.
Amber
Base station running in standalone mode (PC is not
on, software is not loaded or USB cable is
disconnected).
Amber blinking
Hardware is initializing and is in diagnostic mode.
Red
If red for a few seconds, base station is initializing. If
red persists, indicates base station failure—contact
technical support.
Off
Base station is not connected to power source.
External Line Indicator Status
The external line indicator lights are located on the
application window.
Indicator
State
Green
The line is available.
Red
The line is in use.
Amber steady
Outgoing calls are disabled on this line.
Amber broken
CyberGenie did not detect a dial tone on this line
during the last call attempt.
Off
The line is not configured.