Filter
Top Products
Chapter 4: Full System Configuration
101
can travel with you between home and office and
work in each location.
To subscribe a new handset to the base
station:
1. Press and hold to turn the handset on.
2. Ensure that your new handset is fully charged.
The on the handset display indicates a fully
charged handset.
3. Subscribe should display. Press . (If
Subscribe does not display, see the next
procedure.)
4. The display will prompt for the system’s
authorization code with Enter AC.
NOTE:
If you are not
sure of the base
station’s authorization
code, see “Base Station
Information” on
page 81.
5. Enter the authorization code and press .
6. The handset displays Subscribing while it
attempts to communicate with your base station.
7. If the subscription process is successful, the
handset displays Subscription Ready. After a
moment the handset will display AVAILABLE ##
(the symbol ## is the assigned handset
number).
If subscription is unsuccessful, the display reads
Subscription Failed. Try again, or refer to
“Troubleshooting” on page 212.
To subscribe a handset to a second base
station:
1. Press to access the handset menu and
scroll through the options.
2. Scroll to >Settings and press , then scroll to
>BaseStation and press , then scroll to
>Subscribe and press .
3. Enter AC appears. Enter the authorization code
and press .
4. The handset displays Subscribing while
establishing a connection to the base station.