Filter
Top Products
Chapter 7: Calls from the Handset
161
NOTE:
You can set up
nicknames for users to
avoid having to use the
entire name for call-by-
name dialing. (See
“Alias” on page 112.)
3. Press to end the call. The call’s duration will
show briefly before the handset display returns to
idle.
To specify a number other than the contact
list default:
NOTE:
When you ask
CyberGenie to dial a
name from the contacts
list, CyberGenie will dial
whichever number you
have listed as the
default unless you
specify otherwise. (See
“Adding and Updating
Contacts” on
page 128.)
1. Access CyberGenie by pressing on the
handset. CyberGenie responds: Who would you
like to call?
2. If CyberGenie is unsure whether it has made an
exact match, it will repeat the name and ask for
confirmation. (If CyberGenie is confident in the
match, this step will be skipped.) If CyberGenie
asks for a confirmation:
3. Press to end the call. The call’s duration will
show briefly before the handset display returns to
idle.
Placing an Internal Call
The CG 2400 system supports up to 10 handsets. If
additional handsets are subscribed to the base
station and assigned to users, a user can dial another
user with a handset directly.
When a user is set up, an extension number is
assigned. (See “Setting up a New User” on
page 105.)
V
OICE (SAY) KEY OPTION DESCRIPTION
Y
ES
1
C
YBER
G
ENIE
WILL
DIAL
THE
NUMBER
N
O
2
C
YBER
G
ENIE
WILL
TRY
AGAIN
VOICE (SAY) KEY OPTION DESCRIPTION
[
CONTACT
NAME
]
AT
[
LOCATION]
C
YBER
G
ENIE
LOOKS
TO
THE
CONTACTS
DATABASE
FOR
THE
CONTACT
’
S
WORK
,
HOME
,
OR
CELL
NUMBER
BASED
ON
YOUR
REQUEST
VOICE (SAY) KEY OPTION DESCRIPTION
Y
ES
1
C
YBER
G
ENIE
WILL
DIAL
THE
NUMBER
N
O
2
C
YBER
G
ENIE
WILL
TRY
AGAIN