Filter
Top Products
CG 2400 User Guide
186
186
Using the Handset as a Baby
Monitor
With two handsets, you can use your CG 2400
system as a baby monitor.
Listening handset
This is the handset you keep with you to listen in on
the baby’s room from a distance.
Monitoring handset
This handset is placed in the baby’s room to monitor
and transmit sounds in the room to a speaker
handset. The monitor handset places a call to the
speaker handset. From the monitor handset, you can
change the BabyPhone call number—the number of
the handset you use to listen to the monitor.
When the BabyPhone feature is activated, the
monitor handset automatically calls the speaker
handset. The monitor handset mutes the ringer and
earpiece so the baby is not disturbed. All keys on the
monitor handset are blocked except for the key,
which you can use to end the BabyPhone call.
NOTE
: If the battery in
the monitor handset is
low, the handset beeps
at the speaker handset
to warn the user.
If the BabyPhone call is interrupted, the speaker
handset will display BabyCallLost Reactivate?, and
the warning light stays on continuously. You can
press to re-establish the call. When the call is
re-established, you hear a confirmation beep every
half minute from the speaker handset. The beep can
be turned off.
When you use the handset as a baby monitor, locate
it in the room where it will easily pick up sounds but
be out of reach of the baby or small child.
To set the monitor handset (in baby’s
room) to the extension of the speaker
handset (in adult’s hearing):
1. Press to access and move through the
menu.
2. Select >Settings >Handset >BabyPhone
>SetPhoneNo and press . Displays the
current extension if one was previously set.