Filter
Top Products
CG 2400 User Guide
32
NOTE:
Your computer
may need to be
rebooted after software
installation. If this
happens, do not
remove the CD.
The Base Station Update - Step 1 of 2 screen will
appear. DO NOT click Update Now yet!
At this point, connect your base station to the
computer and power it up before completing
software installation. See the procedure below.
Connecting the Base Station
At this point, connect your base station before
continuing software installation procedures.
1. Plug the USB cable
into the computer.
2. Plug the power
supply into an
approved electrical
outlet. Once the
power is connected,
the indicator light
on the base station
should start
blinking amber.
3. If using the wall
mount, slip the
base station into
place on the wall mount until it clicks firmly into
place.