Filter
Top Products
Chapter 4: Full System Configuration
91
To add an external line:
To set general
properties, business
hours, routing, and
auto attendant features
for the new line, see
the following section—
”Setting General
Properties”.
1. Access the Configuration
window if not already
there.
2. From the CyberGenie@
Work menu bar, click .
A dialog box will open.
3. Type a line description,
then click OK.
To delete an external line:
1. Highlight the phone line to be deleted.
2. From the CyberGenie@Work menu bar, click .
3. Click Yes to confirm the deletion.
You can also remove a line by right-clicking Line 1
or Line 2 from either the Configuration window’s
resources panel or the External Line Summary on the
properties panel, then selecting the Delete option.
Setting General Properties
From the General Properties tab, you can change the
description of an existing line, disable outgoing calls
for a particular line, and, for Line 1 only, configure
the line for voice calls, fax calls, or both.
To set general properties:
1. Access the Configuration window if not already
there.
2. Click External Line(s)
if the installed lines are
hidden.
3. Click Line 1 or Line 2 on the resources
panel, or double click the line number or
description in the External Line Summary on the
properties panel. The property tabs will appear on
the properties panel: