Filter
Top Products
4.4 COMMON DIGITAL INTEGRATION FEATURES AND SETUP PROCEDURES
90
INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX
For KX-TD series
Press
the
PROGRAM
button or lift the handset.
7.
Repeat these steps for each telephone.
4.4.11 Two-Way Transfer into Mailbox
This feature allows an extension users to record a conversation into another person's mailbox
by pressing the Two-Way Transfer (TWT) button followed by the mailbox number. This is
commonly used by a person who is taking a detailed message for someone else and wants the
message recorded in the mailbox at the same time.
4.4.12 Two-Way Transfer Button Assignment
For the Two-Way Transfer feature to work at an extension, the extension must have a TWT
button on it. This key must be either a DSS/BLF or CO key (must have a lamp). Follow the
procedure below to assign a TWT button on an extension. (This is a station level program and
should be done at each individual phone.)
1.
Enter Station Programming:
For KX-TA624
With the phone on-hook,
Set
the
MEMORY
switch to
"PROGRAM"
.
(Display changes to PITS-PGM Mode.)
For KX-TD series
a. With the phone on-hook,
Press
the
PROGRAM
button.
b. Dial
[99]
. (Display changes to PT-PGM Mode.)
2.
Press
the desired
FLEXIBLE (CO
or
DSS/BLF)
button that you want to assign as the
TWT button.
3.
Press [91]
.
Screen output: 2WAY-TRANS:
4.
Enter
a Voice Mail extension number.
Screen output: 2WAY-TRANS: _ _ _
(_ _ _ = The extension number you entered).
5.
Press STORE
.
6.
Exit the program mode:
For KX-TA624
Set
the
MEMORY
switch to
"SET"
.
For KX-TD series
Press
the
PROGRAM
button or lift the handset.
7.
Repeat these steps for each telephone.
Conditions:
This button must be a CO or DSS/BLF button to be
programed as a TWR button. When all Voice Mail ports
are busy and this key is pressed, the user will hear
reorder tone.