Filter
Top Products
B7 SYSTEM ADMINISTRATION - HARDWARE SETTINGS
250
SYSTEM ADMINISTRATOR'S GUIDE
*1
When your KX-TD series telephone system is in DPT Integration mode.
*2
When your KX-TA624 telephone system is in APT Integration mode.
N/A Not available
—Not needed
Table 67
Parameter Value Range
(Default)
Description/Function
Integration
Mode
1. None
2. Inband
3. APT
4. DPT
(TVS50: APT
TVS80: DPT)
Specifies the method of integrating the VPS with the
PBX.
1. None - Both PBX and VPS work independently,
without accessing information concerning the status
of the other.
2. Inband - The PBX sends DTMF tone codes to the
VPS to indicate the state of the call (busy, answered,
disconnect, etc.). VPS performance is improved with
Inband Integration because call state recognition is
faster than with standard call progress tone detection.
The PBX code for each call state must be set in the
Inband Signaling Parameters. If PBX type is set to a
KX-T series telephone system, the Inband Signaling
Parameters will automatically default to the proper
codes. This is available with any of the following
Panasonic KX-T series telephone systems: T1232,
TA series, T96, T336, TD816, TD1232, TD308.
3. APT - The VPS communicates with the PBX via the
APT interface. This is available only with Panasonic
KX-TA624.
4. DPT - The VPS communicates with the PBX via the
DPT interface. This is available with any of the
following Panasonic KX-TD series telephone
systems:TD816, TD1232, TD308.
If set to "APT" or "DPT", the extension numbers of VPS
Port 1 and VPS Port 2 can be assigned in sub-parameter.
Extension
Number of
VPS Port 1
2-5 digits
(TA624: 107
TD816/1232: 165
TD308: 295)
Specifies the extension number of VPS port 1.
Extension
Number of
VPS Port 2
2-5 digits
(TA624: 108
TD816/1232: 166
TD308: 296)
Specifies the extension number of VPS port 2.