Panasonic KX-TVS50 Telephone User Manual


 
A1 SYSTEM FEATURES
170
SYSTEM FEATURES
Calling a Beeper allows a subscriber to be notified by a beeper
when he has a message(s). If the beeper has a
display, it is possible to send to it a callback
number. The callback number can be
recorded when a caller leaves a message. If
the caller does not leave a callback number,
the System Callback No., or the caller's
number if it is received through a telephone
company's Caller ID service, will be sent
instead.
To utilize this feature, follow the procedure
below.
1)
Go to the System Administration Top Menu,
and type 1-2 (Program - Class of Service) and
COS No.(1-63). Select "Yes" in the
Authorization for Message Notification
parameter. Make 1 selection as you like in the
Beeper Callback No. Entry Mode parameter.
2)
From the System Administration Top Menu,
type 1-1-1-Mailbox No.-Y-2-Device No. (1-
3) (Program - Mailbox Setting - Enter/Edit -
Mailbox No. Entry - Do you want to edit this
mailbox? - Notification Setting - Device No.
Entry). For Dial Number parameter: Before
the beeper number, enter your PBX's line
access code (for dialing outward). After the
beeper number enter an X. (This X represents
the callback number that the caller will enter,
and later will appear on your beeper.) Finally,
select "Beeper" in the Type of Device
parameter.
See "Dial Number" and "Type of
Device" in Table 36 in B2
SYSTEM ADMINISTRATION
- MAILBOXES.
See "Authorization for Message
Notification" and "Beeper
Callback No. Entry Mode" in
Table 37 and 38 in B3 SYSTEM
ADMINISTRATION -
SETTING COS (CLASS OF
SERVICE) PARAMETERS.
See C3 SETTING COS
(CLASS OF SERVICE)
PARAMETERS.
Table 32
FEATURE DESCRIPTION REFERENCE