Filter
Top Products
4.3 CONNECTING THE KX-TVS50/80 WITH THE PANASONIC KX-TD816, KX-TD1232 AND KX-TD308
INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX
81
ports.
•
KX-TVS50/80 (2 ports): assign 1 jack
From the
SYS-PGM NO ?
screen:
a)
Enter
[117].
b)
Press
the
NEXT
button (SP-PHONE).
Screen output: M: # #
c)
Enter the jack number of the port you will use for the Voice Mail (2 - 8).
d)
Press STORE.
e)
Press END
(HOLD) when finished.
4.
Skip this step unless setting flexible numbering.
System Program [118] (Voice Mail Extension Number Assignment) is automatically set.
This program allows you to assign an extension number to each Voice Mail port. Since
the jack connected to the VPS provides 2 extensions, this enables you to assign extension
numbers to each port. You can assign any extension number that is not already assigned
to another port. To reach the VPS, users dial these extension numbers. It is not necessary
to change the default programming for the extensions 295 and 296.
From the
SYS-PGM NO ?
screen:
a)
Enter
[118].
b)
Press
the
NEXT
button (SP-PHONE).
Screen output: VM NO?
c)
Press
the
NEXT
button (SP-PHONE).
Screen output: VM-1: #_ _ -1: 295
( _ _ = the port number you entered in program 117)
d)
Enter the extension number that you want this port to have.
(The default extension number for port 1: 295; port 2: 296)
e)
Press STORE.
f)
Repeat c, d, and e until all extension numbers are entered.
Conditions: Jack 01 cannot be used as a Voice Mail port. A jack
programmed as a Manager Extension (System Program
[006]) cannot be used in this program.
Conditions: No 2 jacks on the system can have the same extension
number. If you try to enter a number that is already
assigned, you will hear an error tone. Each digital
extension connected provides 2 Voice Mail ports and
must have 2 different extension numbers assigned.