Filter
Top Products
7.2 UTILITY COMMANDS
142
SYSTEM MAINTENANCE AND TROUBLESHOOTING
2.
Select the item to be restored to the flash memory, then
Press RETURN
.
3.
Press RETURN
.
When "CCC" appears, the VPS is ready for loading.
4.
Set the data terminal to the sending (Call) mode (Xmodem). Then enter the backup
filename.
Press ENTER
. The backup data will be restored to the flash memory.
5.
When the parameter load has been completed, power-off and restart the system.
Note
The data terminal used must be equipped with communications software that supports the
Xmodem file transfer protocol. The command can be canceled by Typing [\] before entering
the sending mode. Once the sending mode has been selected, use the cancel command of the
communication software being used.
7.2.9 Print All of the VPS Parameters (GPRN)
This command is used to print all VPS parameter settings (output to screen).
Type GPRN,
then
Press RETURN
.
$ LOAD
VPS Flash Memory Data Load (PC -> VPS : Xmodem)
1: Program
2: Parameters
3: System Prompts
4. User Prompts-1
5. User Prompts-2
6. Custom Service Menu
7. Personal Greetings
8. Company Greetings
Select No.:=
To start press ‘RETURN’
Start - - - - - - Load!!