Filter
Top Products
B2 SYSTEM ADMINISTRATION - MAILBOXES
198
SYSTEM ADMINISTRATOR'S GUIDE
Notification Setting
The parameters for the Message Waiting Notification - Device feature are set using this
procedure. A maximum of 3 destinations (Device 1, 2, 3) can be specified per mailbox.
•
Class of Service programming determines if the Subscriber is able to use this feature.
•
If the destination device is a telephone, the subscriber will be called when he has
message(s), and will have a chance to listen to the message(s).
•
If the destination device is a beeper, the subscriber will be notified when he has
message(s). If the beeper has a display, it is possible to send to it a callback number. The
callback number can be recorded when a caller leaves a message. If he does not leave a
callback number, the System Callback No., or the caller's number if it is received through
a telephone company's Caller ID service, will be sent instead.
All Calls
Transfer to
Mailbox
1. Yes
2. No
(No)
If this parameter is set to "Yes," all calls routed to the
extension are automatically forwarded to the extension's
mailbox without ringing the telephone. Forwarding is
accomplished through the Automated Attendant service.
Callers are permitted to leave a message.
Note
: When this feature has been set to "Yes", the mailbox
owner's extension does not necessarily need to exist as a
phone extension of the PBX.
To access the proper menu for Message Waiting Notification, follow the menu path
as shown:
System Administration Top Menu - 1 - 1 - 1 - Mailbox No. - 2 - Device No. 1, 2,
or 3.
Table 35
Parameter Value Range
(Default)
Description/Function