Panasonic KX-TVS50 Telephone User Manual


 
5.5 SETTING MAILBOXES
CUSTOMIZING THE SYSTEM
119
Table 25
Description Value Range
(Default)
Description/Function
Dial Number Up to 32 Digits of
[1-9,0, ,#,P,T,M,X]
(None)
Assigns the telephone or beeper number to Device 1,
2 and/or 3.
P: Pause
T: Dial Tone Detection
M: Dial Mode Switching Code (DTMF to Pulse, or
Pulse to DTMF)
X: Callback Number Entry Code
1-9, 0, , #: Dial Codes
The callback number entry code (X) must be entered
if COS is set to enable and set to beeper.
Use backspace to delete your entry.
Type of
Device
1. Telephone
2. Beeper
(Telephone)
Assigns whether device is beeper or telephone.
Use Mode
1. Not Use
2. Continuously
3. Scheduled
(Continuously)
Not Use: Does not use device.
Continuously: The VPS notifies each time a message
is recorded in the mailbox.
Scheduled: The VPS notifies the subscriber if a
message is left during one of the time frames.
No. of Retries 0-9 Times
(0)
Specifies the number of times a device should be
retried when busy or no-answer.
Busy Delay
Time
0-120 min
(3)
The time the VPS will wait before retry on busy.
No Answer
Delay Time
60-120 min
(60)
The time the VPS will wait before retry on No
Answer.
Time Frame 1,
2
MON - SUN
1-12: h
00-59: min
AM/PM: am/pm
: All Day
Space: No Use
Weekly Schedule for Message Waiting Notification.
The schedule is only used when Use Device is set to
Scheduled.