Filter
Top Products
7.2 UTILITY COMMANDS
SYSTEM MAINTENANCE AND TROUBLESHOOTING
145
7.2.12 Custom Service Menu Access Count Clear (CCLR)
Each Custom Service has an access counter that counts the number of times the service has
been accessed. This command clears this counter.
Type CCLR, Press Space,
and
Enter
Custom Service Menu (1-100), then
Press RETURN
.
Note
Type CCLR 0 to clear the access counters of all Custom Services.
7.2.13 Message Waiting Lamp Retry Times (MWL)
This command is used to specify the number of times the VPS will attempt to turn on the
Message Waiting Lamp of the called extension. This setting is required when a PBX other than
the Panasonic KX-T series telephone system is used.
Note
This setting is not valid if "Message Waiting Lamp for Every Message" is set to "Yes."
7.2.14 Setting Minimum Recording Length (MRL)
This command is used to specify the minimum message recording length (0-3 s). Messages
shorter than this setting are discarded from the mailbox.
Note
The minimum recording length can only be set using this command.
1.
Type MRL
, then
Press RETURN
.
[4]-Dept Dial: Department Dialing menu will play when the "4" is
pressed.
$ CCLR 20
Custom Menu <20> Access Counter Cleared !!
$ MWL
Current Setting of M.W.L. Retry Count is 1
Enter M.W.L. Retry Count (1-3) =