Filter
Top Products
7.2 UTILITY COMMANDS
138
SYSTEM MAINTENANCE AND TROUBLESHOOTING
Device Error Log Indications
Error Indications at System Startup
Example of a terminal display when errors are generated
Table 27
Indication Meaning
CPU MEM-GET CPU card software memory acquisition error.
CPU card is short of memory temporarily because
of too much traffic.
CLOCK Clock access error. Clock IC is out of order.
Check the hardware.
FLASH
MEMORY
DATA R/W (xx:yyyy) Flash Memory access error. If there is a sector that
often causes errors, check the flash memory.
xx : IDE error code
yyyy : read/write error sector number
DSP* SCAN DSP-SCAN error. DSP is out of order. Check the
hardware.
DSP* FIFO DSP/FIFO error. During the system is handling
calls, there is wrong with DSP and FIFO memory
temporarily.
CPU APPLICATION (x) Application error. While the system is handling
calls, temporary application error occurs.
x: port number
* = Port number (1-2)
Table 28
Indication Meaning
ROM ERROR: Sum Error!! ROM checksum error.
FLASH MEMORY ERROR: Initialize
Error!!
Flash Memory initialization error.
FLASH MEMORY ERROR: No
System!!
No system Flash Memory present.
FLASH MEMORY ERROR: Program
Load Error!!
Program could not be loaded from system Flash
Memory.
FLASH MEMORY ERROR: Program
Sum Error!!
Checksum error in program loaded from system
Flash Memory.
FLASH MEMORY ERROR: System
Data Error!!
Error Loading of administrator data from system
Flash Memory.
SYSTEM ERROR: 1 Administrator data error.