Filter
Top Products
B3 SYSTEM ADMINISTRATION - SETTING COS (CLASS OF SERVICE) PARAMETERS
206
SYSTEM ADMINISTRATOR'S GUIDE
Authorization
for Message
Notification
1. Yes
2. No
(No)
If set to "Yes," Subscribers are able to utilize the
Message Waiting Notification feature. The sub-
parameters to be set include Beeper Callback No. Entry
Mode, MWL Notification for Unreceived Message, and
Device Notification for Unreceived Message. If set to
"No", sub-parameters cannot be assigned.
Note
: This parameter in COS No. 1 is set to "Yes" when
the Quick Setup procedure is used to create Subscriber
mailboxes.
Beeper
Callback
No. Entry
Mode
1. Caller Select
2. Without
3. Before
4. After
5. Disable
(Disable)
Permits Subscribers to use the Callback Number Entry
feature.
Caller
Select:
After recording a message, callers are asked
if they would like to enter a callback
number.
Without: Without recording a message, the caller is
asked to enter the callback number.
Before: Before recording a message, the system
asks the caller to enter the callback number.
After: After recording a message, the system asks
the caller to enter the callback number.
Disable: Disables the Callback Number Entry
feature.
Note
: To utilize this feature, the callback number entry
code must be included in the Subscriber's beeper
number. When "Disable" is selected or if the caller does
not enter a callback number, "System Callback No." (See
Table 56) will be displayed on the beeper's display. If a
caller's number is received through a telephone
company's Caller ID service, the caller's number will be
displayed instead of "System Callback No."
MWL
Notification for
Unreceived
Message
1. Yes
2. No
(Yes)
The message waiting lamp will be illuminated when this
parameter has been set to "Yes" and when unplayed
messages remain after the Subscriber has accessed the
mailbox for Subscriber service.
Table 37
Parameter Value Range
(Default)
Description/Function