Filter
Top Products
B3 SYSTEM ADMINISTRATION - SETTING COS (CLASS OF SERVICE) PARAMETERS
SYSTEM ADMINISTRATOR'S GUIDE
209
Prompt mode 1. System
2. User 1
3. User 2
(User 1)
Specifies the language used for voice prompts.
Note
: If User 1 or User 2 is specified as Prompt Mode but
not recorded by the Message Manager, the VPS will
automatically play the factory recorded system prompts in
English. By default, both User 1 and User 2 prompts are not
recorded.
Authorization
for Message
Notification
1. Yes
2. No
(Yes)
When set to "Yes," the Message Manager is able to utilize
the Message Waiting Notification feature. The sub-
parameters to be set include Beeper Callback No. Entry
Mode, MWL Notification for Unreceived Message, and
Device Notification for Unreceived Message. If set to "NO",
sub-parameters cannot be assigned.
Beeper
Callback
No. Entry
Mode
1. Caller
Select
2. Without
3. Before
4. After
5. Disable
(Disable)
Permits the Message Manager to use the Callback Number
Entry feature.
Caller
Select:
After recording a message, the caller is asked
if the message is urgent. If urgent, the caller is
asked to enter the callback number.
Without: Without recording a message, the caller is
asked to enter the callback number.
Before: Before recording a message, the system asks
the caller to enter the callback number.
After: After recording a message, the system asks the
caller to enter the callback number.
Disable: Disables the Callback Number Entry feature.
Note
: To utilize this feature, the callback number entry code
must be included in the Subscriber's beeper number. When
"Disable" is selected or if the caller does not enter a callback
number, "System Callback No." (See Table 56) will be
displayed on the beeper's display. If a caller's number is
received through a telephone company's Caller ID service,
the caller's number will be displayed instead of "System
Callback No."
MWL
Notification for
Unreceived
Message
1. Yes
2. No
(Yes)
The message waiting lamp is illuminated when this
parameter has been set to "Yes" and when unplayed
messages remain after the Message Manager has accessed
the mailbox.
Table 38
Parameter Value Range
(Default)
Description/Function