Filter
Top Products
B4 SYSTEM ADMINISTRATION - PORT SERVICE
212
SYSTEM ADMINISTRATOR'S GUIDE
Port 1 - Night Mode
Note
The port assignment procedure for Port 2 is the same as Port 1.
Incoming Call
Service
1. Voice Mail
2. Auto. Attn.
3. Interview
4. Custom
(Auto. Attn.)
Specifies one of 4 incoming call services.
Note 1
: When you specify the Interview Service, one of
Subscriber's Interview mailbox numbers should also be
specified.
Note 2
: When you specify the Custom service, one of 100
(1-100) Custom service numbers should also be specified.
Incoming Call
Service Prompt
1. System
2. User 1
3. User 2
4. Selective
(User 1)
Specifies the language of voice prompts to be played on
this port.
Note 1
: This parameter is not valid if incoming call
service is set to "Interview" or "Custom".
Note 2
: If "Selective" is specified, you will need to select
a prompt available for rotary callers. See "Prompt for
Rotary Callers" below.
Prompt for
Rotary Callers
1. System
2. User 1
3. User 2
(System)
Specifies in which language rotary callers hear the voice
prompts when they cannot enter any digit to select a
"Prompt Selection Number" while Multilingual selection
menu message is being played.
Delayed
Answer
Time
0-60 s
(0)
Specifies whether the port answers immediately (0) or
with delay (1 - 60 s).
*1
Available for the KX-TVS80 only.
To select the Night Mode Features for port 1, follow the menu path as shown:
System Administration Top Menu - 1 - 3 - Port No. (1) - 2
Table 39
Parameter Value Range
(Default)
Description/Function