Filter
Top Products
7.3 SYSTEM REPORTS
SYSTEM MAINTENANCE AND TROUBLESHOOTING
155
Type [Y]
(yes) or
[N]
(no). If "Y" is entered, the system will clear the data. Wait until "Port
Usage Report Data Cleared!!" appears on the screen before proceeding.
7.3.7 Flash Memory Usage Report
The Flash Memory Usage Report indicates the amount of flash memory storage used and the
flash memory availability in minutes. It also presents the following statistics:
• The number of messages that were recorded by callers and were copied since the last
clearing of this report.
• The number of messages that were copied since the last clearing of this report.
• The number of messages that were deleted by subscribers, and expired and were removed
by the system since the last clearing of this report.
• The number of messages that expired and were removed by the system since the last
clearing of this report.
KX-TVS50
KX-TVS50 with an optional expansion memory card (KX-TVS52)
To select the Flash Memory Usage Report, follow the menu path as shown:
System Administration Top Menu - 2 - 1 - 6
System Reports - System Report Clear - Port Usage Statistics Clear
May I clear a port usage report data? (Y/N) : =
** Flash Memory Usage Report JAN-22-1999 8:30 PM **
Drive Avail Used (%)
1 119 min 1min (1)
FROM : : JAN-21-1999 10:20 PM **
New Cpy Del Exp
MSGs 10 0 10 0
** Flash Memory Usage Report JAN-22-1999 8:30 PM **
Drive Avail Used (%)
1 119 min 1min (1)
2 120 min 0min (0)
FROM : : JAN-21-1999 10:20 PM
New Cpy Del Exp
MSGs 10 0 10 0