Filter
Top Products
2-30 Installation
2.4.4
Installing a 3 CO Line and 8 EXT Expansion Card (KX-
TA62477) and 8 Extension Expansion Card (KX-TA62470)
5. First, insert the plastic spacer into the hole near the Caller ID
card connector on the KX-TA62477. Attach the extension
connectors to the system, install the KX-TA62477 and secure
the two extension bolts.
Extension Bolts
Extension Connectors
3 CO Line and 8 EXT Expansion Card
(KX-TA62477)
Caller ID Card Connector
Spacer
6. Insert the modular plugs of the telephone line cords
(2-conductor wiring) into the modular jacks (CO 4 through 6)
on the card. Refer to 2.3.3, Outside (CO) Line Connection.
7. Connect the line cords to the terminal board or the modular
jacks from the Central Office.
8. Insert the modular plugs of the telephone line cords (2 or 4-
conductor wiring) into the modular jacks (JACK 09 through 16)
on the card. Refer to 2.3.4, Extension Connection.
9. Attach the optional Caller ID card (KX-TA62493) to the Caller
ID Card connector, if desired.
Refer to 2.4.2, Caller ID and OGM/FAX Detection Card
Installation.