Filter
Top Products
4.2 System Programming
Toll Restriction — Class 2 – 5 Denied Codes
302–305
System Programming 4-55
Description These allow the user to specify which numbers are toll-restricted
for each toll restriction class as follows.
Program [302]: restricts COS number 2.
Program [303]: restricts COS numbers 2 and 3.
Program [304]: restricts COS numbers 2 – 4.
Program [305]: restricts COS numbers 2 – 5.
Selection • Code number: 01 – 20
• Toll restriction number: 11 digits
Default All codes – Not stored
Programming 1. Enter a program address (302 to 305).
Display example: Class-2 Table
2. Press NEXT.
Display: CODE NO? →
3. Enter a code number.
Pressing NEXT also can enter code number 01.
Display example: 01: ...........
4. Enter a toll call number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new
number.
5. Press STORE.
6. To program another code, press NEXT or PREV, or
SELECT and enter the desired code number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions • There is a maximum of 20 numbers which can be restricted for each
program. Each number must have eleven digits, consisting of 0 – 9, ,
# and x (PAUSE button). The character “x” can be used as a wild card
character and is entered by pressing the PAUSE button.
• Program [306] “Toll Restriction — Exception Codes” is used to assign
exceptions to these numbers. Programs [601]–[603] “TRS – Class of
Service (COS) Assignment — Day/Night/Lunch” are used to set the toll
restriction value for each extension.
Feature Reference Section 3, Features
Toll Restriction