4-100 System Programming
4.2 System Programming
DISA Tone Selection after the Security Code
518
Description Enables or disables sending a beep to a caller after the Security
Code is entered. If enabled, a beep is sent to the caller when the
code entered is the same as one of the security codes assigned in
program [512] “DISA Security Codes”.
Selection Enable / Disable
Default Enable
Programming 1. Enter 518.
Display: DISA Dial Tone
2. Press NEXT.
Display: Enable
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Conditions None
Feature Reference Section 3, Features
Direct Inward System Access (DISA)