3-118 Features
S 3 Features
System Data Default Set
Description This system can re-initialize the system-programmed data. If all the
programmed data is cleared, the system will restart using the
default settings.
Condition • The default setting for each programming item is listed in Section 5.2,
“Default Values”.
Programming Reference
Section 4, System Programming
[999] System Data Clear
Feature References None
Operation Reference Section 2, Installation
2.9 System Data Clear
System Programming with a Proprietary Telephone
Description This system can be programmed with a proprietary telephone (PT).
Proprietary telephones available for system programming are:
KX-T7130, and KX-T7030 (Display Proprietary Telephones).
An extension connected to JACK 01 is allowed to perform system
programming.
For more information and programming instructions, refer to
Section 4, “System Programming”.
Conditions • During system programming, the system operates normally.
• During system programming, the extension is regarded as busy.
• To access system administration, a valid password must be entered. The
password is factory-programmed and can be changed.
Programming Reference
Section 4, System Programming
[002] System Password
Feature References None
Operation References Not applicable.