Filter
Top Products
4-132 System Programming
4.2 System Programming
Caller ID Log Priority Selection
904
Description Selects the first display of an incoming outside call by the Caller ID
service.
Selection • Jack number: 01 – 24, ( = all jacks)
• Number / Name
Default All jacks – Name
Programming 1. Enter 904.
Display: CID Priority
2. Press NEXT.
Display: Jack NO? →
3. Enter a jack number.
Pressing NEXT also can enter jack number 01.
Display example: #01:Name
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. Press END.
Conditions • This program is available when the Caller ID service provides both the
name and number. If only the number is provided, this program is not
necessary.
• To assign all jacks to the same selection, press the key in step 3. In
this case, the display will show: CO :Mixed.
• An optional Caller ID card is required.
Feature Reference Section 3, Features
Caller ID